SATELLITE INTERNET CONNECTION WITH A DECODER
This step by step Manual will give you detailed guideline on how to connect to the internet with your decoders, either HITV,DSTV,MYTV etc. you must take note that all relevant equipments for this setup must be available before doing the configuration.
Introduction
comminication between computers is a major part of the PC computing Industry. Thanks to the World Wide Web (www), no computer user is an Island. Whether using a dialup modem or broad band technology, virtually all PCs can be connected to other computers, enabling them to share files, send and receiving email, and access the Internet.
With the explosive growth of the internet, modem and network technologies were joined because both could use the same client software and protocols. Today, the most popular suite of networking protocols –TCP/IP – is used on both Local Area Network (LANs) and the internet. When you dial into an Internet Service Protocol (ISP), you are actually connecting to a network using a modem instead of a network interface card, and when you use most broadband services, your path to the internet typically starts with a network interface card, built in network card, built in network port, network – to – USB adapter, or even a wireless connection.
Thanks to the combination of huge multi megabyte downloads needed to update software and support hardware, dynamics websites with music and full – motion videos and increased demand for online services, even the fastest dial up modem (such as mtn fastlink,starcomms, visafones etc) which can download at just 53kbps, isn’t sufficient for heavy internet use. More and More users are taking advantage of various types of broadband internet access solution. But the most preferred to me is the cable decoder internet access system.
For many users, cable modem service which piggybacks on the same cable TV service line that brings your TV many channels, represent both a big boost in speed from the available with ISDN and a major savings in initial cost and monthly charges which your subscription fee covers.
Cable Modem Services normally is sold as an “all you can eat” unlimited access plan with a modest installation cost (materials to buy to commence installation). Because more and more cable networks (such as DSTV, HITV, CTL and the most recent DAAR SAT) support a single standard, you can choose any of the decoders of all this cable TV providers to connect your system to the internet.
Connection Requirements and Overview
Connection Requirements
* SPLITTER
* LINKSYS CABLE MODEM
* RJ – 45 NIC Cable
* Ethernet Cable
* Router(WIRELESS OR WIRED if you intend to use more than one pc)
* DECODER(mytv, hitv, dstv, daarsat etc)
* Coaxial to RJ-45 converter or adapter
* COAXIAL CABLES
Overview
* SPLITTER
* There are many types of Satellite Decoder Splitter, you buy your favorite at the shops where it’s been sold What do we use the Splitter for? This enables you to create a parallel connection for the coaxial cable (this is the cable that is used to connect your decoder to the TV and as well as the decoder to the Dish hanged outside).the splitter will share the signal that comes from the dish outside between the TV and the Router cable modem, which will convert the signal to an internet signal
* LINKSYS CABLE MODEM
* Definition of a Cable Modem: A cable modem is a device that delivers high-speed Internet connectivity via a cable television company which serves as the Internet service provider (ISP). A cable modem requires a subscription to cable Internet service, and will not function by simply
* connecting it to a cable TV (CATV) feed. Externally, a cable modem resembles a DSL modem. The coax cable that brings in the digital CATV signal provides a channel for upstream and downstream Internet service. This does not interfere with television, as there is plenty of "real estate" or bandwidth space on the coax cable to handle both TV and Internet signals. Why Linksys Cable Modem: The Linksys Cable Modem does not require you to pay any additional separate monthly subscription to the cable company, you only need to connect it with your current subscription with your satellite cable TV provider which will only work with a Coaxial Cable.
* RJ – 45 NIC Cable
* This is a typical networking cable which we will use to network all the network devices that we have listed above such as the Router (Cable Modem), we will use it to make a connection from the Router to the computer to transmit internet.
* Ethernet Cable
* Ethernet cables connect network devices such as modems, routers, and adapters. They transmit data using the Ethernet protocol. Most Ethernet cables have RJ-45 jacks on both ends, each with 8 pins. (They look similar to telephone jacks, which use 4 pins or 6 pins.)
* • Equipment using an Ethernet cable is referred to as wired.
* • Wireless equipment uses radio waves in place of some (or all) Ethernet cables. A network device that uses both Ethernet and wireless connections is usually called just wireless.
* The Physical Ethernet Cables
* • Use Cat 5 cables. (Cat 5 is a measure of quality, meaning that it supports traffic up to 100 MB / sec.) These are also called 10/100 Base-T Cat 5 cables.
* • Some Ethernet cable wires crises-cross internally, others are straight through, meaning that pin 1 is wired to pin 1 on the other end, etc. A port (socket) for a straight through Ethernet cable is sometimes called an uplink port. If you aren't sure about a cable, and you can see the inside wires' colors, hold the two ends of the plugs up, so the same side of the plug is facing you.
* Router
* A router is used to transmit internet to more than 1 computer system on a network setup, this enables you to network your connection to other system (PCs). This is also known as cable modem.
* The connection runs the incoming cable connection to an external cable modem, which has an Ethernet connection to a router, which then connects
* DECODER
* A decoder is a device which is used to decode the satellite signal receive from the satellite dish into a video, the decoded signal converted into video is what we receive on our TV, The purpose of we connecting to the internet with a decoder is to convert your decoder to a Modem, a cable decoders is a modem because it modulates and demodulates, but it also functions as a tuner, a network bridge, an encryptor etc.
* To connect your PC or laptop to a decoder to access the net, you do not use a serial port as with dialup modem.
* COAXIAL CABLES
* This connect the decoder to the splitter and one end of the cable goes into the TV while the other end goes to the WAN port of the router (Linksys Router)
* Things to take Note before buying all the equipments required for setup:
* • I always recommend running a router between a cable modem and a PC because a router not only allows more than one PC to be connected, but also provides a robust hardware firewall that helps shield your PC(s) connected to it from internet – based attacks.
* • You can directly connect PCs to a cable decoder using USB; I do not recommend that option because it precludes using a router (cable modem)
* • Some cable modems have a built – in router, in which case you don’t need to purchase a separate one. If your computer doesn’t include an Ethernet adapter built into the motherboard or a separate Ethernet card, you can install an Ethernet card into an available internal expansion slot or use a USB – based Ethernet adapter instead. I use a USB - based Ethernet adapter on my HITV decoder.
* • The cable modem connects to the CATV network using the same coaxial cable connection as your cable TV.
* The steps to Connection
The steps to Connection
Step 1
Coaxial Cable cord
SplitterPort
Connect the coaxial cable from your dish to your satellite decoder splitter( i.e the “in” part) and then connect one cable from the first “out” port to your decoder and the one from the second port to your Linksys modem; the cable can be purchased from any shop where they sell cable
decoder while one of the other coaxial cable cords is connected to your television to watch satellite stations.
Step 2
Coaxial Cable cord
LINKSYS ROUTER
Connect the second Coaxial cable cord from the splitter to WAN port of your router (Linksys Router)
Step 3
Coaxial Cable cord
If your cable modem does not have an inbuilt router facility, you will need to connect your cable Modem to the CATV network of your router using the same coaxial cable connection as your TV, but might need to convert it
Step 4
Ethernet Cable
LINKSYS ROUTER
Connect the Ethernet Cable from the router to your computer system, which can stand as a client if you are using only one computer or server if you are networking more than one system, make sure that your computer has an inbuilt Ethernet adapter on the Motherboard or a separate Ethernet card, you can also install an Ethernet Card into an available internal expansion slot or you can alternatively use a USB – Based Ethernet Adapter instead. In our connection we use a USB –based Ethernet adapter on HITV Decoder
Step 5
LINKSYS ROUTER
RJ -45 Cable
At the back of the Linksys Router there are several ports, port 1 – 4 Stand as the LAN(Local Area Network) Port which can be used to connect 1 -4 CPU to the router with an RJ -45NIC Cable, in most cases the cables comes with the router when you purchase it. Connect 1 -4 CPU to the LAN Port of the router with your RJ -45 Cables, please don’t mistake it with the Ethernet cable, as is only to be used to connect the computer which is the server to the Router for network routing and also note that each of the CPU that connect to the Router LAN Port with the help of RJ-45 must have an inbuilt Network card install in them, while the server should have an Ethernet card adapter install on the board as mentioned earlier.
Step 6
The fifth port of the Linksys Router which stand as the WAN Port (Wireless Access Network) Connect the second coaxial cable that comes from the splitter to the WAN Port of the Router, but note that you need a converter which is an adapter that convert the coaxial cable to RJ -45 cable since the Router WAN port does not have a direct port for a coaxial cable
Step 7
The sixth port of the Linksys Router which is called the UplinkPort, the port can be connected to a Hub or a Switch to enable additional users or computers within the network range to share with the internet of your decoder via wireless access
System Configuration Steps
1. Start up your computer that we call the server, and click on the start button and then click on control panel
2. Click on Network connection from the control panel tab
3. Click on Create a new Network connection from the Network Connection from the control panel tab
4. Select the Connect to the Internet Radio button and then click on Next button
5. Select the Choose from the a list of Internet Service providers[ISPs] radio button and click on Next button
6. Finally Click on Finish button, Then the connection will then come up
7. Open up your Internet Browser and start browsing
Browsers Compatibility
(1) Internet Explorer
(2) Google Chrome
(3) Opera
(4) Firefox
And much more
Operating System Compatibility (1) Windows Operating System (2) Linux Operating System
What can this Internet Technology be used for? (1) Personal Usage
(2) Group Usage in an Organization or Company
(3) Cyber Café
(4) BusinessCenter for Email Service and Internet Calls
Benefits of using this Technology (1) Pay only monthly subscription for your cable TV and it covers the Internet Bill (2) Browse with a very fast internet speed of 4 mbs download speed
(3) Connect large number of Computer systems with the help of a Network devices
(4) Connection configuration is simple and easy
(5) You can watch Cable TV while browsing the internet at the same time without conflict
(6) No downtime for internet connection except if your subscription as elapsed, or one of the connection devices gets faulty.
(7) You can buy two decoders to setup a mini cyber café and cable TV football center at the same time
9janetworks
HELPLINE 07031815582
Monday, August 15, 2011
SATELLITE INTERNET CONNECTION WITH A DECODER
SATELLITE INTERNET CONNECTION WITH A DECODER
This step by step Manual will give you detailed guideline on how to connect to the internet with your decoders, either HITV,DSTV,MYTV etc. you must take note that all relevant equipments for this setup must be available before doing the configuration.
Introduction
comminication between computers is a major part of the PC computing Industry. Thanks to the World Wide Web (www), no computer user is an Island. Whether using a dialup modem or broad band technology, virtually all PCs can be connected to other computers, enabling them to share files, send and receiving email, and access the Internet.
With the explosive growth of the internet, modem and network technologies were joined because both could use the same client software and protocols. Today, the most popular suite of networking protocols –TCP/IP – is used on both Local Area Network (LANs) and the internet. When you dial into an Internet Service Protocol (ISP), you are actually connecting to a network using a modem instead of a network interface card, and when you use most broadband services, your path to the internet typically starts with a network interface card, built in network card, built in network port, network – to – USB adapter, or even a wireless connection.
Thanks to the combination of huge multi megabyte downloads needed to update software and support hardware, dynamics websites with music and full – motion videos and increased demand for online services, even the fastest dial up modem (such as mtn fastlink,starcomms, visafones etc) which can download at just 53kbps, isn’t sufficient for heavy internet use. More and More users are taking advantage of various types of broadband internet access solution. But the most preferred to me is the cable decoder internet access system.
For many users, cable modem service which piggybacks on the same cable TV service line that brings your TV many channels, represent both a big boost in speed from the available with ISDN and a major savings in initial cost and monthly charges which your subscription fee covers.
Cable Modem Services normally is sold as an “all you can eat” unlimited access plan with a modest installation cost (materials to buy to commence installation). Because more and more cable networks (such as DSTV, HITV, CTL and the most recent DAAR SAT) support a single standard, you can choose any of the decoders of all this cable TV providers to connect your system to the internet.
Connection Requirements and Overview
Connection Requirements
* SPLITTER
* LINKSYS CABLE MODEM
* RJ – 45 NIC Cable
* Ethernet Cable
* Router(WIRELESS OR WIRED if you intend to use more than one pc)
* DECODER(mytv, hitv, dstv, daarsat etc)
* Coaxial to RJ-45 converter or adapter
* COAXIAL CABLES
Overview
* SPLITTER
* There are many types of Satellite Decoder Splitter, you buy your favorite at the shops where it’s been sold What do we use the Splitter for? This enables you to create a parallel connection for the coaxial cable (this is the cable that is used to connect your decoder to the TV and as well as the decoder to the Dish hanged outside).the splitter will share the signal that comes from the dish outside between the TV and the Router cable modem, which will convert the signal to an internet signal
* LINKSYS CABLE MODEM
* Definition of a Cable Modem: A cable modem is a device that delivers high-speed Internet connectivity via a cable television company which serves as the Internet service provider (ISP). A cable modem requires a subscription to cable Internet service, and will not function by simply
* connecting it to a cable TV (CATV) feed. Externally, a cable modem resembles a DSL modem. The coax cable that brings in the digital CATV signal provides a channel for upstream and downstream Internet service. This does not interfere with television, as there is plenty of "real estate" or bandwidth space on the coax cable to handle both TV and Internet signals. Why Linksys Cable Modem: The Linksys Cable Modem does not require you to pay any additional separate monthly subscription to the cable company, you only need to connect it with your current subscription with your satellite cable TV provider which will only work with a Coaxial Cable.
* RJ – 45 NIC Cable
* This is a typical networking cable which we will use to network all the network devices that we have listed above such as the Router (Cable Modem), we will use it to make a connection from the Router to the computer to transmit internet.
* Ethernet Cable
* Ethernet cables connect network devices such as modems, routers, and adapters. They transmit data using the Ethernet protocol. Most Ethernet cables have RJ-45 jacks on both ends, each with 8 pins. (They look similar to telephone jacks, which use 4 pins or 6 pins.)
* • Equipment using an Ethernet cable is referred to as wired.
* • Wireless equipment uses radio waves in place of some (or all) Ethernet cables. A network device that uses both Ethernet and wireless connections is usually called just wireless.
* The Physical Ethernet Cables
* • Use Cat 5 cables. (Cat 5 is a measure of quality, meaning that it supports traffic up to 100 MB / sec.) These are also called 10/100 Base-T Cat 5 cables.
* • Some Ethernet cable wires crises-cross internally, others are straight through, meaning that pin 1 is wired to pin 1 on the other end, etc. A port (socket) for a straight through Ethernet cable is sometimes called an uplink port. If you aren't sure about a cable, and you can see the inside wires' colors, hold the two ends of the plugs up, so the same side of the plug is facing you.
* Router
* A router is used to transmit internet to more than 1 computer system on a network setup, this enables you to network your connection to other system (PCs). This is also known as cable modem.
* The connection runs the incoming cable connection to an external cable modem, which has an Ethernet connection to a router, which then connects
* DECODER
* A decoder is a device which is used to decode the satellite signal receive from the satellite dish into a video, the decoded signal converted into video is what we receive on our TV, The purpose of we connecting to the internet with a decoder is to convert your decoder to a Modem, a cable decoders is a modem because it modulates and demodulates, but it also functions as a tuner, a network bridge, an encryptor etc.
* To connect your PC or laptop to a decoder to access the net, you do not use a serial port as with dialup modem.
* COAXIAL CABLES
* This connect the decoder to the splitter and one end of the cable goes into the TV while the other end goes to the WAN port of the router (Linksys Router)
* Things to take Note before buying all the equipments required for setup:
* • I always recommend running a router between a cable modem and a PC because a router not only allows more than one PC to be connected, but also provides a robust hardware firewall that helps shield your PC(s) connected to it from internet – based attacks.
* • You can directly connect PCs to a cable decoder using USB; I do not recommend that option because it precludes using a router (cable modem)
* • Some cable modems have a built – in router, in which case you don’t need to purchase a separate one. If your computer doesn’t include an Ethernet adapter built into the motherboard or a separate Ethernet card, you can install an Ethernet card into an available internal expansion slot or use a USB – based Ethernet adapter instead. I use a USB - based Ethernet adapter on my HITV decoder.
* • The cable modem connects to the CATV network using the same coaxial cable connection as your cable TV.
* The steps to Connection
The steps to Connection
Step 1
Coaxial Cable cord
SplitterPort
Connect the coaxial cable from your dish to your satellite decoder splitter( i.e the “in” part) and then connect one cable from the first “out” port to your decoder and the one from the second port to your Linksys modem; the cable can be purchased from any shop where they sell cable
decoder while one of the other coaxial cable cords is connected to your television to watch satellite stations.
Step 2
Coaxial Cable cord
LINKSYS ROUTER
Connect the second Coaxial cable cord from the splitter to WAN port of your router (Linksys Router)
Step 3
Coaxial Cable cord
If your cable modem does not have an inbuilt router facility, you will need to connect your cable Modem to the CATV network of your router using the same coaxial cable connection as your TV, but might need to convert it
Step 4
Ethernet Cable
LINKSYS ROUTER
Connect the Ethernet Cable from the router to your computer system, which can stand as a client if you are using only one computer or server if you are networking more than one system, make sure that your computer has an inbuilt Ethernet adapter on the Motherboard or a separate Ethernet card, you can also install an Ethernet Card into an available internal expansion slot or you can alternatively use a USB – Based Ethernet Adapter instead. In our connection we use a USB –based Ethernet adapter on HITV Decoder
Step 5
LINKSYS ROUTER
RJ -45 Cable
At the back of the Linksys Router there are several ports, port 1 – 4 Stand as the LAN(Local Area Network) Port which can be used to connect 1 -4 CPU to the router with an RJ -45NIC Cable, in most cases the cables comes with the router when you purchase it. Connect 1 -4 CPU to the LAN Port of the router with your RJ -45 Cables, please don’t mistake it with the Ethernet cable, as is only to be used to connect the computer which is the server to the Router for network routing and also note that each of the CPU that connect to the Router LAN Port with the help of RJ-45 must have an inbuilt Network card install in them, while the server should have an Ethernet card adapter install on the board as mentioned earlier.
Step 6
The fifth port of the Linksys Router which stand as the WAN Port (Wireless Access Network) Connect the second coaxial cable that comes from the splitter to the WAN Port of the Router, but note that you need a converter which is an adapter that convert the coaxial cable to RJ -45 cable since the Router WAN port does not have a direct port for a coaxial cable
Step 7
The sixth port of the Linksys Router which is called the UplinkPort, the port can be connected to a Hub or a Switch to enable additional users or computers within the network range to share with the internet of your decoder via wireless access
System Configuration Steps
1. Start up your computer that we call the server, and click on the start button and then click on control panel
2. Click on Network connection from the control panel tab
3. Click on Create a new Network connection from the Network Connection from the control panel tab
4. Select the Connect to the Internet Radio button and then click on Next button
5. Select the Choose from the a list of Internet Service providers[ISPs] radio button and click on Next button
6. Finally Click on Finish button, Then the connection will then come up
7. Open up your Internet Browser and start browsing
Browsers Compatibility
(1) Internet Explorer
(2) Google Chrome
(3) Opera
(4) Firefox
And much more
Operating System Compatibility (1) Windows Operating System (2) Linux Operating System
What can this Internet Technology be used for? (1) Personal Usage
(2) Group Usage in an Organization or Company
(3) Cyber Café
(4) BusinessCenter for Email Service and Internet Calls
Benefits of using this Technology (1) Pay only monthly subscription for your cable TV and it covers the Internet Bill (2) Browse with a very fast internet speed of 4 mbs download speed
(3) Connect large number of Computer systems with the help of a Network devices
(4) Connection configuration is simple and easy
(5) You can watch Cable TV while browsing the internet at the same time without conflict
(6) No downtime for internet connection except if your subscription as elapsed, or one of the connection devices gets faulty.
(7) You can buy two decoders to setup a mini cyber café and cable TV football center at the same time
9janetworks
HELPLINE 07031815582
This step by step Manual will give you detailed guideline on how to connect to the internet with your decoders, either HITV,DSTV,MYTV etc. you must take note that all relevant equipments for this setup must be available before doing the configuration.
Introduction
comminication between computers is a major part of the PC computing Industry. Thanks to the World Wide Web (www), no computer user is an Island. Whether using a dialup modem or broad band technology, virtually all PCs can be connected to other computers, enabling them to share files, send and receiving email, and access the Internet.
With the explosive growth of the internet, modem and network technologies were joined because both could use the same client software and protocols. Today, the most popular suite of networking protocols –TCP/IP – is used on both Local Area Network (LANs) and the internet. When you dial into an Internet Service Protocol (ISP), you are actually connecting to a network using a modem instead of a network interface card, and when you use most broadband services, your path to the internet typically starts with a network interface card, built in network card, built in network port, network – to – USB adapter, or even a wireless connection.
Thanks to the combination of huge multi megabyte downloads needed to update software and support hardware, dynamics websites with music and full – motion videos and increased demand for online services, even the fastest dial up modem (such as mtn fastlink,starcomms, visafones etc) which can download at just 53kbps, isn’t sufficient for heavy internet use. More and More users are taking advantage of various types of broadband internet access solution. But the most preferred to me is the cable decoder internet access system.
For many users, cable modem service which piggybacks on the same cable TV service line that brings your TV many channels, represent both a big boost in speed from the available with ISDN and a major savings in initial cost and monthly charges which your subscription fee covers.
Cable Modem Services normally is sold as an “all you can eat” unlimited access plan with a modest installation cost (materials to buy to commence installation). Because more and more cable networks (such as DSTV, HITV, CTL and the most recent DAAR SAT) support a single standard, you can choose any of the decoders of all this cable TV providers to connect your system to the internet.
Connection Requirements and Overview
Connection Requirements
* SPLITTER
* LINKSYS CABLE MODEM
* RJ – 45 NIC Cable
* Ethernet Cable
* Router(WIRELESS OR WIRED if you intend to use more than one pc)
* DECODER(mytv, hitv, dstv, daarsat etc)
* Coaxial to RJ-45 converter or adapter
* COAXIAL CABLES
Overview
* SPLITTER
* There are many types of Satellite Decoder Splitter, you buy your favorite at the shops where it’s been sold What do we use the Splitter for? This enables you to create a parallel connection for the coaxial cable (this is the cable that is used to connect your decoder to the TV and as well as the decoder to the Dish hanged outside).the splitter will share the signal that comes from the dish outside between the TV and the Router cable modem, which will convert the signal to an internet signal
* LINKSYS CABLE MODEM
* Definition of a Cable Modem: A cable modem is a device that delivers high-speed Internet connectivity via a cable television company which serves as the Internet service provider (ISP). A cable modem requires a subscription to cable Internet service, and will not function by simply
* connecting it to a cable TV (CATV) feed. Externally, a cable modem resembles a DSL modem. The coax cable that brings in the digital CATV signal provides a channel for upstream and downstream Internet service. This does not interfere with television, as there is plenty of "real estate" or bandwidth space on the coax cable to handle both TV and Internet signals. Why Linksys Cable Modem: The Linksys Cable Modem does not require you to pay any additional separate monthly subscription to the cable company, you only need to connect it with your current subscription with your satellite cable TV provider which will only work with a Coaxial Cable.
* RJ – 45 NIC Cable
* This is a typical networking cable which we will use to network all the network devices that we have listed above such as the Router (Cable Modem), we will use it to make a connection from the Router to the computer to transmit internet.
* Ethernet Cable
* Ethernet cables connect network devices such as modems, routers, and adapters. They transmit data using the Ethernet protocol. Most Ethernet cables have RJ-45 jacks on both ends, each with 8 pins. (They look similar to telephone jacks, which use 4 pins or 6 pins.)
* • Equipment using an Ethernet cable is referred to as wired.
* • Wireless equipment uses radio waves in place of some (or all) Ethernet cables. A network device that uses both Ethernet and wireless connections is usually called just wireless.
* The Physical Ethernet Cables
* • Use Cat 5 cables. (Cat 5 is a measure of quality, meaning that it supports traffic up to 100 MB / sec.) These are also called 10/100 Base-T Cat 5 cables.
* • Some Ethernet cable wires crises-cross internally, others are straight through, meaning that pin 1 is wired to pin 1 on the other end, etc. A port (socket) for a straight through Ethernet cable is sometimes called an uplink port. If you aren't sure about a cable, and you can see the inside wires' colors, hold the two ends of the plugs up, so the same side of the plug is facing you.
* Router
* A router is used to transmit internet to more than 1 computer system on a network setup, this enables you to network your connection to other system (PCs). This is also known as cable modem.
* The connection runs the incoming cable connection to an external cable modem, which has an Ethernet connection to a router, which then connects
* DECODER
* To connect your PC or laptop to a decoder to access the net, you do not use a serial port as with dialup modem.
* COAXIAL CABLES
* This connect the decoder to the splitter and one end of the cable goes into the TV while the other end goes to the WAN port of the router (Linksys Router)
* Things to take Note before buying all the equipments required for setup:
* • I always recommend running a router between a cable modem and a PC because a router not only allows more than one PC to be connected, but also provides a robust hardware firewall that helps shield your PC(s) connected to it from internet – based attacks.
* • You can directly connect PCs to a cable decoder using USB; I do not recommend that option because it precludes using a router (cable modem)
* • Some cable modems have a built – in router, in which case you don’t need to purchase a separate one. If your computer doesn’t include an Ethernet adapter built into the motherboard or a separate Ethernet card, you can install an Ethernet card into an available internal expansion slot or use a USB – based Ethernet adapter instead. I use a USB - based Ethernet adapter on my HITV decoder.
* • The cable modem connects to the CATV network using the same coaxial cable connection as your cable TV.
* The steps to Connection
The steps to Connection
Step 1
Coaxial Cable cord
SplitterPort
Connect the coaxial cable from your dish to your satellite decoder splitter( i.e the “in” part) and then connect one cable from the first “out” port to your decoder and the one from the second port to your Linksys modem; the cable can be purchased from any shop where they sell cable
decoder while one of the other coaxial cable cords is connected to your television to watch satellite stations.
Step 2
Coaxial Cable cord
LINKSYS ROUTER
Connect the second Coaxial cable cord from the splitter to WAN port of your router (Linksys Router)
Step 3
Coaxial Cable cord
If your cable modem does not have an inbuilt router facility, you will need to connect your cable Modem to the CATV network of your router using the same coaxial cable connection as your TV, but might need to convert it
Step 4
Ethernet Cable
LINKSYS ROUTER
Connect the Ethernet Cable from the router to your computer system, which can stand as a client if you are using only one computer or server if you are networking more than one system, make sure that your computer has an inbuilt Ethernet adapter on the Motherboard or a separate Ethernet card, you can also install an Ethernet Card into an available internal expansion slot or you can alternatively use a USB – Based Ethernet Adapter instead. In our connection we use a USB –based Ethernet adapter on HITV Decoder
Step 5
LINKSYS ROUTER
RJ -45 Cable
At the back of the Linksys Router there are several ports, port 1 – 4 Stand as the LAN(Local Area Network) Port which can be used to connect 1 -4 CPU to the router with an RJ -45NIC Cable, in most cases the cables comes with the router when you purchase it. Connect 1 -4 CPU to the LAN Port of the router with your RJ -45 Cables, please don’t mistake it with the Ethernet cable, as is only to be used to connect the computer which is the server to the Router for network routing and also note that each of the CPU that connect to the Router LAN Port with the help of RJ-45 must have an inbuilt Network card install in them, while the server should have an Ethernet card adapter install on the board as mentioned earlier.
Step 6
The fifth port of the Linksys Router which stand as the WAN Port (Wireless Access Network) Connect the second coaxial cable that comes from the splitter to the WAN Port of the Router, but note that you need a converter which is an adapter that convert the coaxial cable to RJ -45 cable since the Router WAN port does not have a direct port for a coaxial cable
Step 7
The sixth port of the Linksys Router which is called the UplinkPort, the port can be connected to a Hub or a Switch to enable additional users or computers within the network range to share with the internet of your decoder via wireless access
System Configuration Steps
1. Start up your computer that we call the server, and click on the start button and then click on control panel
2. Click on Network connection from the control panel tab
3. Click on Create a new Network connection from the Network Connection from the control panel tab
4. Select the Connect to the Internet Radio button and then click on Next button
5. Select the Choose from the a list of Internet Service providers[ISPs] radio button and click on Next button
6. Finally Click on Finish button, Then the connection will then come up
7. Open up your Internet Browser and start browsing
Browsers Compatibility
(1) Internet Explorer
(2) Google Chrome
(3) Opera
(4) Firefox
And much more
Operating System Compatibility (1) Windows Operating System (2) Linux Operating System
What can this Internet Technology be used for? (1) Personal Usage
(2) Group Usage in an Organization or Company
(3) Cyber Café
(4) BusinessCenter for Email Service and Internet Calls
Benefits of using this Technology (1) Pay only monthly subscription for your cable TV and it covers the Internet Bill (2) Browse with a very fast internet speed of 4 mbs download speed
(3) Connect large number of Computer systems with the help of a Network devices
(4) Connection configuration is simple and easy
(5) You can watch Cable TV while browsing the internet at the same time without conflict
(6) No downtime for internet connection except if your subscription as elapsed, or one of the connection devices gets faulty.
(7) You can buy two decoders to setup a mini cyber café and cable TV football center at the same time
9janetworks
HELPLINE 07031815582
Saturday, July 16, 2011
HOW TO FORMAT NOKIA S60v5 TOUCH SCREEN PHONES
HOW TO FORMAT NOKIA S60v5 TOUCH SCREEN PHONES
This is a very Wonderful Tutorial all Nokia Touch Screen Phone Users should lay their hands on...
Examples: Nokia 5800 Xpress Music, 5230, X6,N96,N97 and any other Touch Screen Phones!
This Trick is called the 3-Finger Salute for S60v5 - Full Hard Reset Trick
ARE YOU HAVING ANY OF THIS PROBLEMS?
1. Blank Screen Phone Unable to Boot.
2. Phone just writing "Nokia" word screen.
3. Install some program but not able to uninstall it after that.
4. Error messages such as "Child Installer" keeps popping-up.
ADVICE!
Be Wise, Dont waste your Money like taking your Phone to any Engineers because of this Problems mention above.. Just Follow my Below Steps.
STEPS FOR FORMATTING
[1.] Turn of your Phone
[2.] Press and hold down the [Green] + [Red] + [Camera] Keys, Dont Remove ur Hands.
[3.] Turn the Phone ON, and keep pressing until you see the Nokia Hands Shaking logo.
After a few minutes when the Full phone formatting completed, your Phone will be back to original system and factory settting.
Goodluck Ur Phone is Back!
This is a very Wonderful Tutorial all Nokia Touch Screen Phone Users should lay their hands on...
Examples: Nokia 5800 Xpress Music, 5230, X6,N96,N97 and any other Touch Screen Phones!
This Trick is called the 3-Finger Salute for S60v5 - Full Hard Reset Trick
ARE YOU HAVING ANY OF THIS PROBLEMS?
1. Blank Screen Phone Unable to Boot.
2. Phone just writing "Nokia" word screen.
3. Install some program but not able to uninstall it after that.
4. Error messages such as "Child Installer" keeps popping-up.
ADVICE!
Be Wise, Dont waste your Money like taking your Phone to any Engineers because of this Problems mention above.. Just Follow my Below Steps.
STEPS FOR FORMATTING
[1.] Turn of your Phone
[2.] Press and hold down the [Green] + [Red] + [Camera] Keys, Dont Remove ur Hands.
[3.] Turn the Phone ON, and keep pressing until you see the Nokia Hands Shaking logo.
After a few minutes when the Full phone formatting completed, your Phone will be back to original system and factory settting.
Goodluck Ur Phone is Back!
Friday, July 15, 2011
Free browsing on mtn,airtel,etisalat,latest tricks for free browsing,how to install operamini,ucweb,bolt,2011 free browsing tricks,new cheats,codes, new updates on working mtn browsing.
Latest Free browsing Cheat For All Phones- july 2011
This is the current and latest cheat to start browsing with your phone, you can as well learn how to configure your java phone to start browsing free, MTN LATEST 4 S60
http server =94.246.126.96
Host = www.mtnonline.com
S60 APPLICATIONS
Snaptu http:// 83.138.182.32 host - www.mtnonline.com
Ebuddy http:// 38.99.73.51/ host -www.mtnonline.com
Nimbuzz http:// 193.67.70.10 host - www.mtnonline.com
Mig33 http:// 74.217.68.3/ host- www.mtnonline.com
Ucweb http:// 123.180.188.29 host- www.mtnonline.com
Bolt http:// 74.54.240.50 host- www.mtnonline.comOR
Host:wap.mtnonline.comor
Host: www.mtnonline.comor
Host:wap.mtnpulse.mtnonline.com
FOR JAVA PHONES: learn now how you can browse free with your java phones!
java phones
IP: 010.199.212.2
PORT : 8080
Custom Server: http:// 64.255.164.20
Socket Server: socket:// 64.255.164.84
Host:10.199.212.8
Custom Server: http:// 064.255.180.192
Host: www.mtnonline.com
CAST BOLT IP: 010.199.212.002
PORT : 8080 Custom
HTTP Server : 64.255.180.52
HOST: ww.mtnonline.com
This is the current and latest cheat to start browsing with your phone, you can as well learn how to configure your java phone to start browsing free, MTN LATEST 4 S60
http server =94.246.126.96
Host = www.mtnonline.com
S60 APPLICATIONS
Snaptu http:// 83.138.182.32 host - www.mtnonline.com
Ebuddy http:// 38.99.73.51/ host -www.mtnonline.com
Nimbuzz http:// 193.67.70.10 host - www.mtnonline.com
Mig33 http:// 74.217.68.3/ host- www.mtnonline.com
Ucweb http:// 123.180.188.29 host- www.mtnonline.com
Bolt http:// 74.54.240.50 host- www.mtnonline.comOR
Host:wap.mtnonline.comor
Host: www.mtnonline.comor
Host:wap.mtnpulse.mtnonline.com
FOR JAVA PHONES: learn now how you can browse free with your java phones!
java phones
IP: 010.199.212.2
PORT : 8080
Custom Server: http:// 64.255.164.20
Socket Server: socket:// 64.255.164.84
Host:10.199.212.8
Custom Server: http:// 064.255.180.192
Host: www.mtnonline.com
CAST BOLT IP: 010.199.212.002
PORT : 8080 Custom
HTTP Server : 64.255.180.52
HOST: ww.mtnonline.com
Browse Absolute Free with ETISALAT using Your Phone And Laptop!
Browse Absolute Free with ETISALAT using Your Phone And Laptop!
Browse Absolute Free with Your ETISALAT! Do you use Etisalat on your mobile phone? Then be ready to start enjoying this free browsing without any money on your phone! Check it out... ETISALAT CONFIRM AND WORKING CHEAT! FOR OPERA!
IP: 080.239.242.153 | 080.239.242.113 | 080.239.242.168
In the port section put in the number below,
PORT: 80
Put this in your Opera:
HTTP Proxy: http://server4.operamini.com:80
In the socket put in this code below,
socket://server4.operamini.com:1080
screw down you will see the option of http or socket, change it to socket.
It is time to start browsing free with Your phone using etisalat!
Remember you can use this cheat to browse free also with your laptop by making your phone as the modem.
This cheat is work for all Applications!
And you know what? You can browse totally free with your 2go!
THE MOST UPDATED AND CONFIRM WORKING CHEAT FOR ETISALAT WITH 0.00 BALANCE!
IP: 064.255.180.129
PORT: 80
Then Put this in the Socket of your Opera:
socket://server4.operamini.com:1080
NOTE: leave every other part empty. Are you browsing free with this tweak? Then share your comment here.
Thanks.
Browse Absolute Free with Your ETISALAT! Do you use Etisalat on your mobile phone? Then be ready to start enjoying this free browsing without any money on your phone! Check it out... ETISALAT CONFIRM AND WORKING CHEAT! FOR OPERA!
IP: 080.239.242.153 | 080.239.242.113 | 080.239.242.168
In the port section put in the number below,
PORT: 80
Put this in your Opera:
HTTP Proxy: http://server4.operamini.com:80
In the socket put in this code below,
socket://server4.operamini.com:1080
screw down you will see the option of http or socket, change it to socket.
It is time to start browsing free with Your phone using etisalat!
Remember you can use this cheat to browse free also with your laptop by making your phone as the modem.
This cheat is work for all Applications!
And you know what? You can browse totally free with your 2go!
THE MOST UPDATED AND CONFIRM WORKING CHEAT FOR ETISALAT WITH 0.00 BALANCE!
IP: 064.255.180.129
PORT: 80
Then Put this in the Socket of your Opera:
socket://server4.operamini.com:1080
NOTE: leave every other part empty. Are you browsing free with this tweak? Then share your comment here.
Thanks.
MULITLINKS NIGERIA WITH YOUR FREEDOM
How to start browsing with your-freedom on Multi-link
How To Start Browsing With Your-freedom with Multi link
click on the read more to follow the simple settings to start browsing with your-freedom on multi-link....
streaming is great but i will advice that you have a multi-link modem
-Install yf make sure you ignore/cancel the welcome message (download yf at your-freedom.de just click downloads)
- the freedom window will then be displayed b/4 then choose your language (preferably english U.S.A)
-Click on configure tab from the configuration window
-Tick the first three boxes,ignore the fourth tick the following three and ignore the last box
-still on the same configuration window in the Server address type this : 83.170.116.31 OR 85.214.149.43 OR 85.214.84.103
-goto the last bar which is connection mode there choose UDP automatically the port bar above will change to 1000 THEN
MANUALLY CHANGE IT TO PORT 53
THEN FOR TWEAK CHOOSE:None
-So we now have the following:85.214.84.103
PORT:53
CONNECTION MODE:UDP [MIND YOU U MAY HAVE TO DOWNLOAD A LOWER VERSION OF YOUR FREEDOM IF A HIGHER VERSION IS NOT WORKING FOR
YOU
TWEAK: none
-Still on the same window click on account information there you will fill in the username and password that you ve earlier
registered
-Now goto Proxy settings which is usually blank by default there you should leave everything blank
-Save and exit you will be returned to the front or main window click on PORTS tab then mark everything there i mean web
proxy port,socks 4/5,open vpn port, e.t.c
-Now go to messages though this is optional but you might need it not withstanding then tick AUTO SCROLL and put your message
mode to DEBUG
Now set your browser (e.g mozilla firefox) proxy server to localhost Port:8080 or 127.0.0.1 port:8080
-Then set your yahoo messenger9 connection setting to localhost Port:1080
-NOTE: Pls you can use between server 01-32 however i advice you to use between server 04,13,12,19 27.
NOW YOU CAN CONNECT YOUR FREEDOM CLIENT AND ONCE THE DOOR OPENS START YOUR PRE CONFIGURE browser and start web browsing
-
-download openvpn here
>install Open VPN.
Next, click on start, control
panel, network connection.
Right click the network
connection that has TAP-Win32
Adapter V9 driver, then click on
properties. Scroll down then click
on Internet Protocol (TCP/IP),
then click on properties.
Click on USe the following DNS
server manually and enter:
Preffered DNS Server:
85.214.18.161
Alternate DNS Server:
85.214.100.186 Then Click on OK
That is all pls you can now start any application or browser on your Pc without setting your browser to localhost:8080 it is
a direct connection software. Not guaranteed to work well on windows vista though except run as administrator (ask if you dont know how)
open vpn on ur browsers
-once you have started your connection you will have to wait until something like a moon shines on your freedon window
dont configure your browser manually just make sure your browsers and application is set to connect directly
NOW CONFIGURE YOUR BROWSERS
For Firefox(Mozilla) brower: Go to: Tools-- Options --Advanced-- Network --Settings. In the settings mark the box"Manual
proxy configuration. Under HTTP Proxy use: localhost Port: 8080. Or 127.0.0.1 port 8080 Mark/tick/check the box"use this
proxy server for all protocols". After this just go down and click"OK"
You are now set to start browsing free.
How To Start Browsing With Your-freedom with Multi link
click on the read more to follow the simple settings to start browsing with your-freedom on multi-link....
streaming is great but i will advice that you have a multi-link modem
-Install yf make sure you ignore/cancel the welcome message (download yf at your-freedom.de just click downloads)
- the freedom window will then be displayed b/4 then choose your language (preferably english U.S.A)
-Click on configure tab from the configuration window
-Tick the first three boxes,ignore the fourth tick the following three and ignore the last box
-still on the same configuration window in the Server address type this : 83.170.116.31 OR 85.214.149.43 OR 85.214.84.103
-goto the last bar which is connection mode there choose UDP automatically the port bar above will change to 1000 THEN
MANUALLY CHANGE IT TO PORT 53
THEN FOR TWEAK CHOOSE:None
-So we now have the following:85.214.84.103
PORT:53
CONNECTION MODE:UDP [MIND YOU U MAY HAVE TO DOWNLOAD A LOWER VERSION OF YOUR FREEDOM IF A HIGHER VERSION IS NOT WORKING FOR
YOU
TWEAK: none
-Still on the same window click on account information there you will fill in the username and password that you ve earlier
registered
-Now goto Proxy settings which is usually blank by default there you should leave everything blank
-Save and exit you will be returned to the front or main window click on PORTS tab then mark everything there i mean web
proxy port,socks 4/5,open vpn port, e.t.c
-Now go to messages though this is optional but you might need it not withstanding then tick AUTO SCROLL and put your message
mode to DEBUG
Now set your browser (e.g mozilla firefox) proxy server to localhost Port:8080 or 127.0.0.1 port:8080
-Then set your yahoo messenger9 connection setting to localhost Port:1080
-NOTE: Pls you can use between server 01-32 however i advice you to use between server 04,13,12,19 27.
NOW YOU CAN CONNECT YOUR FREEDOM CLIENT AND ONCE THE DOOR OPENS START YOUR PRE CONFIGURE browser and start web browsing
-
-download openvpn here
>install Open VPN.
Next, click on start, control
panel, network connection.
Right click the network
connection that has TAP-Win32
Adapter V9 driver, then click on
properties. Scroll down then click
on Internet Protocol (TCP/IP),
then click on properties.
Click on USe the following DNS
server manually and enter:
Preffered DNS Server:
85.214.18.161
Alternate DNS Server:
85.214.100.186 Then Click on OK
That is all pls you can now start any application or browser on your Pc without setting your browser to localhost:8080 it is
a direct connection software. Not guaranteed to work well on windows vista though except run as administrator (ask if you dont know how)
open vpn on ur browsers
-once you have started your connection you will have to wait until something like a moon shines on your freedon window
dont configure your browser manually just make sure your browsers and application is set to connect directly
NOW CONFIGURE YOUR BROWSERS
For Firefox(Mozilla) brower: Go to: Tools-- Options --Advanced-- Network --Settings. In the settings mark the box"Manual
proxy configuration. Under HTTP Proxy use: localhost Port: 8080. Or 127.0.0.1 port 8080 Mark/tick/check the box"use this
proxy server for all protocols". After this just go down and click"OK"
You are now set to start browsing free.
NIGERIANS Start Browsing free with your 2go! WITH MTN
Start Browsing free with your 2go!
Unless you live in a village where there is no internet connection then you will have every reason not to know what is 2go!
Well this is free browsing cheat for 2go! Simple yet working fast free cheat, enjoy and please drop your 2go username lets chat.
Use the following cheat--
This is amazing! You can now start browsing free with your 2go, without paying any money, and it will be as fast as if you are subscribed!
Follow the step below:
Set your default IP to mtn mms. After that-
Activate it for all application.
And you are set to go!
With this you are going to start browsing absolutely free.
2go free browsing start now!
Do you want to keep your friends always online? Then share this blog link with them or share it with your friends through facebook and twitter by using the button below.
Unless you live in a village where there is no internet connection then you will have every reason not to know what is 2go!
Well this is free browsing cheat for 2go! Simple yet working fast free cheat, enjoy and please drop your 2go username lets chat.
Use the following cheat--
This is amazing! You can now start browsing free with your 2go, without paying any money, and it will be as fast as if you are subscribed!
Follow the step below:
Set your default IP to mtn mms. After that-
Activate it for all application.
And you are set to go!
With this you are going to start browsing absolutely free.
2go free browsing start now!
Do you want to keep your friends always online? Then share this blog link with them or share it with your friends through facebook and twitter by using the button below.
Wednesday, July 13, 2011
FREE DOWNLOAD AND SETTINGS OF PRIVOXY OR P-WEB PROXY
FREE DOWNLOAD AND SETTINGS OF PRIVOXY OR P-WEB PROXY
The free browsing neighbourhood of MTN witnessed yet another new
tunneling software, privoxy by name.
No much talk, just google it and download the privoxy for free
, it comes as a zip file.
After downloading it, extract it to your desktop for easy location.
Open the extracted folder on your desktop, carefully look for a n ICON
"P" with a blue color.
Double click on it and it will open something like a Notepad, minimize
it then configure your browsers and applications thus;
Http proxy:127.0.0.1
PORT 8118
With the above done, you are in for free browsing with privoxy.
Once again download the privoxy for free at http://goo.gl/Rg3v1
Should any problem arise while settinG it up or have any question, feel
free to contact me on +2347031815582
The free browsing neighbourhood of MTN witnessed yet another new
tunneling software, privoxy by name.
No much talk, just google it and download the privoxy for free
, it comes as a zip file.
After downloading it, extract it to your desktop for easy location.
Open the extracted folder on your desktop, carefully look for a n ICON
"P" with a blue color.
Double click on it and it will open something like a Notepad, minimize
it then configure your browsers and applications thus;
Http proxy:127.0.0.1
PORT 8118
With the above done, you are in for free browsing with privoxy.
Once again download the privoxy for free at http://goo.gl/Rg3v1
Should any problem arise while settinG it up or have any question, feel
free to contact me on +2347031815582
Tuesday, July 12, 2011
OPERA MINI 4.2 EDITING THE START UP SPLASH SCREEN
1. Open v file and the splash image in HxD hex editor. I used splash.pngas an example in this tutorial.
2. Highlight all the contents of splash.png and copy it. You maypress Ctrl+A then Ctrl+C. Take note of the value in Lenght indicator. This is the filesize ofsplash.png in hexadecimal.
3. Goto the v file tab and press Ctrl+F. Search for “png” text string. After that press F3.
4. Highlight the bytes starting from 89 50 4E 470D 0A 1A or
the address 00002A20 x 0A until the length indicator reaches 2D2.
5. Press Ctrl+V to change the default splash. Now where done with splash image embedded in the v file. The next thing to bedone is to change the addresses embedded in the v file. Thoseenclosed in a yellow box in procedure 1.
6. Open the scientific calculator and put it in hex mode. Subtract 2D2 from the Lenght value obtained in procedure 2. Takenote of the answer. – 2D2
7. Add the answer in procedure 6 to the address enclosed in a box in procedure 1. Change them accordingly to the result of adding those embedded addresses to the answer in procedure 6. Please be patient in editing those embedded addresses.
8. Save v file and exit HxD hex editor.
9. Open operamini 4.2 with WinRAR and drag the v file from the desktop to operamini.jar.
10. Click OK and close WinRAR.
11. Finally, install your modified operamini.jar onyour phone or use microemulator on your computer to test your work.
hex_editior.zip (853.21 KB)
HAVING ANY PROBLEM(S)
OR EMAIL 9janetworks@gmail.com
9JANETWORKS
CALL +234 703 181 5582
2. Highlight all the contents of splash.png and copy it. You maypress Ctrl+A then Ctrl+C. Take note of the value in Lenght indicator. This is the filesize ofsplash.png in hexadecimal.
3. Goto the v file tab and press Ctrl+F. Search for “png” text string. After that press F3.
4. Highlight the bytes starting from 89 50 4E 470D 0A 1A or
the address 00002A20 x 0A until the length indicator reaches 2D2.
5. Press Ctrl+V to change the default splash. Now where done with splash image embedded in the v file. The next thing to bedone is to change the addresses embedded in the v file. Thoseenclosed in a yellow box in procedure 1.
6. Open the scientific calculator and put it in hex mode. Subtract 2D2 from the Lenght value obtained in procedure 2. Takenote of the answer. – 2D2
7. Add the answer in procedure 6 to the address enclosed in a box in procedure 1. Change them accordingly to the result of adding those embedded addresses to the answer in procedure 6. Please be patient in editing those embedded addresses.
8. Save v file and exit HxD hex editor.
9. Open operamini 4.2 with WinRAR and drag the v file from the desktop to operamini.jar.
10. Click OK and close WinRAR.
11. Finally, install your modified operamini.jar onyour phone or use microemulator on your computer to test your work.
hex_editior.zip (853.21 KB)
HAVING ANY PROBLEM(S)
OR EMAIL 9janetworks@gmail.com
9JANETWORKS
CALL +234 703 181 5582
Saturday, June 25, 2011
AIRTEL NIGERIA 1 GIG FREE BROWSING
AIRTEL 1
GB (1024 MB) for free
browsing.subscribers a
(1024 MB) for free
browsing,
1. Check your data balance
by dialing *141*712...*0#,
or better still *123*10#. In
addition dial *123*5# for
SMS balance (note them).
2. Recharge with about
N100 or N200.
3. Dial *444# to activate
Airtel ValueMax. 4. Input
*203*1# to activate Airtel
Diamond step up package.
5. Dial *300*1# to receive
500 MB of free data and
100 free SMS (your N200
remains intact). You will
notice that each time you
dial *300*1#, u will get
500MB data.. Continue the
process and get more up to
infinite gig..
For more info
call 9janetworks
07031815582
or e-mail 9janetworks@gmail.com
GB (1024 MB) for free
browsing.subscribers a
(1024 MB) for free
browsing,
1. Check your data balance
by dialing *141*712...*0#,
or better still *123*10#. In
addition dial *123*5# for
SMS balance (note them).
2. Recharge with about
N100 or N200.
3. Dial *444# to activate
Airtel ValueMax. 4. Input
*203*1# to activate Airtel
Diamond step up package.
5. Dial *300*1# to receive
500 MB of free data and
100 free SMS (your N200
remains intact). You will
notice that each time you
dial *300*1#, u will get
500MB data.. Continue the
process and get more up to
infinite gig..
For more info
call 9janetworks
07031815582
or e-mail 9janetworks@gmail.com
Saturday, June 18, 2011
IWP INDIA WEB PROXY WITH MTN & ETISALAT & MULTILINKS NETWORKS
FREE BR0WSING WITH IWP SOFTWARE 4.0
INDIA WEB PROXY ALLOWS US TO BROWSE WITH A TOKEN AND BROWSE WITH IT'S FULLEST!
THERE ARE MANY WAYS AND TYPES OF PACKAGES IN IWP BUT THE BEST ONE IS THIS 18G PER MONTH
WITH THIS,YOU CAN DO WHAT MTN,AIRTEL,GLO, MY ETISALAT WOULDNT LOVE YOU TO SEE IN TERMS OF
THEIR WICKED PACKAGE WHICH DOESN'T LAST .
I AM POSTING WITH MY IWP ACCOUNT NOW AND STILL ON . . . . . . . . . . . . .
D
FREE DOWNLOAD IWP LATEST VERSION 4.0 THROUGH THIS LINK http://web-tunnel.com/download/IWP4.0.zip
2. YOU ALSO NEED JAVA
DOWNLOAD JAVA RUN TIME HERE- http://javadl.sun.com/webapps/download/AutoDL?BundleId=41723
SETTINGS WITH MTN NIGERIA
IWP [india web proxy settings]
input these parameters
Web Host: www.mtnonline. com
Web Port:80#443
User Name & Password: send blank email to 9janetworks@gmail.com
Proxy URL: http://service.mykidshealth.info/callDoctor.php
Ristricted HTTP Proxy information if any~
Proxy Host: 10.199.212.2
Port: 8080
User Name: web
Password: web
SETTINGS WITH ETISALAT NIGERIA
Web Host: mobile.etisalat.ng
Web Port:80#443
User Name & Password: send blank email to 9janetworks@gmail.com
Proxy URL: http://service.mykidshealth.info/callDoctor.php
Ristricted HTTP Proxy information if any~
Proxy Host: 41.190.16.19
Port: 8080
User Name: leave it blank
Password: leave it blank
NOTE: u need to have credit but it won't deduct it
Then click "start proxy" NOTE: dail up ur connection first before starting the proxy to avoid
writting "invalid URL! or DNS server down. contact us"
FOR YOUR MOZILLA
OPEN IT,
CLICK TOOL,
THEN OPTIONS,GO TO ADVANCE,THEN NETWORK,GO TO SETTINGS,
SELECT MANUAL PROXY CONFIGURATION AND PUT THIS IP
HTTP 127. 0. 0. 1 PORT 6051
SSL PROXY 127. 0. 0. 1 PORT 6051
THATZ ALL YOU NEED,
WITH THIS 18G,BELIEVE IT ,YOU MUST THANK ME FOR THIS
EVERYTHING YOU NEED TO DOWNLOAD!
YOU CAN EVEN SHARE IT WITH YOUR FRIENDS AND STILL COLLECT MONEY FROM THEM!
BECAUSE I BET YOU CAN EXHAUST 18G IN ONE MONTH
PLEASE NOTE,I DONT SHARE SOMEONE SERVER WITH ANOTHER PERSON,
IN TERMS OF DOWNLOAD, YOU CAN WATCH ONLINE TV, LISTEN TO RADIO,GAMES,ANTI VIRUS AND OTHERS. . . . . . . . . . . . . . . . .
UPDATE UR ANTI VIRUS,JAVA, AND OTHERS. . . . . . . . . . . . . . . . . . . . . .
CHAT WITH YOUR YAHOO MESSENGER,FACEBOOK, ENTER SECURED SITES
LIKE GMAIL,YAHOO,HOTMAIL AND EVERY OTHER SITES
EVERYTHING YOU NEED TO BROWSE IN A MONTH WILL NOT BE MORE THAN 5G IN A MONTH BUT HERE,
I AM OFFERING 18G TO YOU FOR JUST N2000!!
FOR YOUR 18G,
CALL 9janetworks ON 07031815582
ADD ME ON FACEBOOK "Brite chidozie or http://facebook.com/brightchidozie05
or e-mail 9janetworks@gmail.com
INDIA WEB PROXY ALLOWS US TO BROWSE WITH A TOKEN AND BROWSE WITH IT'S FULLEST!
THERE ARE MANY WAYS AND TYPES OF PACKAGES IN IWP BUT THE BEST ONE IS THIS 18G PER MONTH
WITH THIS,YOU CAN DO WHAT MTN,AIRTEL,GLO, MY ETISALAT WOULDNT LOVE YOU TO SEE IN TERMS OF
THEIR WICKED PACKAGE WHICH DOESN'T LAST .
I AM POSTING WITH MY IWP ACCOUNT NOW AND STILL ON . . . . . . . . . . . . .
D
FREE DOWNLOAD IWP LATEST VERSION 4.0 THROUGH THIS LINK http://web-tunnel.com/download/IWP4.0.zip
2. YOU ALSO NEED JAVA
DOWNLOAD JAVA RUN TIME HERE- http://javadl.sun.com/webapps/download/AutoDL?BundleId=41723
SETTINGS WITH MTN NIGERIA
IWP [india web proxy settings]
input these parameters
Web Host: www.mtnonline. com
Web Port:80#443
User Name & Password: send blank email to 9janetworks@gmail.com
Proxy URL: http://service.mykidshealth.info/callDoctor.php
Ristricted HTTP Proxy information if any~
Proxy Host: 10.199.212.2
Port: 8080
User Name: web
Password: web
SETTINGS WITH ETISALAT NIGERIA
Web Host: mobile.etisalat.ng
Web Port:80#443
User Name & Password: send blank email to 9janetworks@gmail.com
Proxy URL: http://service.mykidshealth.info/callDoctor.php
Ristricted HTTP Proxy information if any~
Proxy Host: 41.190.16.19
Port: 8080
User Name: leave it blank
Password: leave it blank
NOTE: u need to have credit but it won't deduct it
Then click "start proxy" NOTE: dail up ur connection first before starting the proxy to avoid
writting "invalid URL! or DNS server down. contact us"
FOR YOUR MOZILLA
OPEN IT,
CLICK TOOL,
THEN OPTIONS,GO TO ADVANCE,THEN NETWORK,GO TO SETTINGS,
SELECT MANUAL PROXY CONFIGURATION AND PUT THIS IP
HTTP 127. 0. 0. 1 PORT 6051
SSL PROXY 127. 0. 0. 1 PORT 6051
THATZ ALL YOU NEED,
WITH THIS 18G,BELIEVE IT ,YOU MUST THANK ME FOR THIS
EVERYTHING YOU NEED TO DOWNLOAD!
YOU CAN EVEN SHARE IT WITH YOUR FRIENDS AND STILL COLLECT MONEY FROM THEM!
BECAUSE I BET YOU CAN EXHAUST 18G IN ONE MONTH
PLEASE NOTE,I DONT SHARE SOMEONE SERVER WITH ANOTHER PERSON,
IN TERMS OF DOWNLOAD, YOU CAN WATCH ONLINE TV, LISTEN TO RADIO,GAMES,ANTI VIRUS AND OTHERS. . . . . . . . . . . . . . . . .
UPDATE UR ANTI VIRUS,JAVA, AND OTHERS. . . . . . . . . . . . . . . . . . . . . .
CHAT WITH YOUR YAHOO MESSENGER,FACEBOOK, ENTER SECURED SITES
LIKE GMAIL,YAHOO,HOTMAIL AND EVERY OTHER SITES
EVERYTHING YOU NEED TO BROWSE IN A MONTH WILL NOT BE MORE THAN 5G IN A MONTH BUT HERE,
I AM OFFERING 18G TO YOU FOR JUST N2000!!
FOR YOUR 18G,
CALL 9janetworks ON 07031815582
ADD ME ON FACEBOOK "Brite chidozie or http://facebook.com/brightchidozie05
or e-mail 9janetworks@gmail.com
Friday, January 7, 2011
HOW TO CREATE A GERMAN IWP SERVER
CREATING A SERVER
Goto any one of 1.vg, 1x.net, kilu.de, co.de, english.lc, wiki.lc etc
there are about 200 of them, all with the same unlimited transfer
volume and a 10GB storage space...Register with any of ur gmail acc.
yahoo acc., or the spambox u generated at spambox.us
* fill in the required details and click on register...If u are
notified that ur registration is successful,goto ur mail box to get
ur password.
* Go back to 1.vg or any of the hosting site where u signed up and
login with ur email acc. and the password that was sent to ur box.
CREATING A SUBDOMAIN: After u've logged in, click on NEW PROJECT...
Click on Webspace,name the project whatever u like, tick any of the
options u see and click on further.
$ You'll be asked to enter a subdomain name, enter name you want to
appear as ur subdomain name and choose any of the suffixes...u will be
given a range of suffixes from 000.de to zzgwe.de...choose the 1 u like
e.g of suffixes, 1.vg,1x.net,8.je,co.de etc
MY EXAMPLE:After I was through with my registration, I clicked on New
Project,I clicked on Webspace I chose terry as my project name,
I ticked only chat and community,I clicked further...I chose terry.kilu.de as my subdomain and I click on create project
$ You'll be asked to wait for 15minutes before your project is created
...All you need do is to log out and log in...the project creation
will be successful after you log in
HOW TO GET YOUR FTP DETAILS: After you've logged in, Click on
MANAGE PROJECT, The project you created will be displayed...Now click on
the project's name...you'll see the following...FTP,PHPmyadmin,Email
...Scroll down to the bottom of the page and get your FTP details.
MY EXAMPLE 2:After I logged in, I clicked on MANAGE PROJECT, I was shown
terry, I clicked on terry...I scrolled to the bottom of
the next page and saw my FTP details which where as follow
server/host: www19.subdomain.com
username : user99989
password : same as my acc. password (wxjzep)
WHAT TO DO WITH FTP DETAIL: FTP means File Transfer Protocol...It is the
rule that must be followed before a file can be transferred from one
location to another.With FTP you can transfer files from any location on
your PC to your Webspace...since those German hosting sites don't have
an inbuilt FTP client, you will have to use an online FTP client e.g
net2ftp.com, ftplive.com, webftp.host1plus.com etc
$ Goto any of the online FTP client and input the following
server/host: ................. Port: 21
username: .................
password: .................
initial directory: /www
SIGN IN
MY EXAMPLE 3:When I got to net2ftp.com I inputed
Server/host: www19.subdomain.com port:21
username : user99989
password : wxjzep
initial directory: /www
I SIGNED IN
HOW TO UPLOAD: After you've logged in to the online FTP client, you will
see an empty directory...click on upload ( at the left side of the page)
FILES TO UPLOAD: The two main files to upload are your tutorial.php and
php.ini...the Two files can be found in the zip file of your IWP. click
on indiawebproxy.zip, click on PHP MODULE...you'll see Testmyserver.php,
tutorial.php and php.ini. drag tutorial.php and php.ini to your desktop
for easier location
$ After clicking on UPLOAD, choose tutorial.php and php.ini
$ You can either choose to rename the tutorial.php or leave it as it is.
RENAME is on the Right side of the page.
MY EXAMPLE 4: http://www.9janetworks.kilu.de/bright.php
NB: FOR THE THREAT OF THOSE WHO SPECIALIZES IN STEALING SERVERS, CHOOSE A
LESS POPULAR SUFFIX eg. japanese.lc,10.je etc OR IF YOU PREFARE USING THE
POPULAR ONES LIKE 1.vg, WAIT FOR A DAY OR 2 DAYS BEFORE UPLOADING YOUR FILES.
Goto any one of 1.vg, 1x.net, kilu.de, co.de, english.lc, wiki.lc etc
there are about 200 of them, all with the same unlimited transfer
volume and a 10GB storage space...Register with any of ur gmail acc.
yahoo acc., or the spambox u generated at spambox.us
* fill in the required details and click on register...If u are
notified that ur registration is successful,goto ur mail box to get
ur password.
* Go back to 1.vg or any of the hosting site where u signed up and
login with ur email acc. and the password that was sent to ur box.
CREATING A SUBDOMAIN: After u've logged in, click on NEW PROJECT...
Click on Webspace,name the project whatever u like, tick any of the
options u see and click on further.
$ You'll be asked to enter a subdomain name, enter name you want to
appear as ur subdomain name and choose any of the suffixes...u will be
given a range of suffixes from 000.de to zzgwe.de...choose the 1 u like
e.g of suffixes, 1.vg,1x.net,8.je,co.de etc
MY EXAMPLE:After I was through with my registration, I clicked on New
Project,I clicked on Webspace I chose terry as my project name,
I ticked only chat and community,I clicked further...I chose terry.kilu.de as my subdomain and I click on create project
$ You'll be asked to wait for 15minutes before your project is created
...All you need do is to log out and log in...the project creation
will be successful after you log in
HOW TO GET YOUR FTP DETAILS: After you've logged in, Click on
MANAGE PROJECT, The project you created will be displayed...Now click on
the project's name...you'll see the following...FTP,PHPmyadmin,Email
...Scroll down to the bottom of the page and get your FTP details.
MY EXAMPLE 2:After I logged in, I clicked on MANAGE PROJECT, I was shown
terry, I clicked on terry...I scrolled to the bottom of
the next page and saw my FTP details which where as follow
server/host: www19.subdomain.com
username : user99989
password : same as my acc. password (wxjzep)
WHAT TO DO WITH FTP DETAIL: FTP means File Transfer Protocol...It is the
rule that must be followed before a file can be transferred from one
location to another.With FTP you can transfer files from any location on
your PC to your Webspace...since those German hosting sites don't have
an inbuilt FTP client, you will have to use an online FTP client e.g
net2ftp.com, ftplive.com, webftp.host1plus.com etc
$ Goto any of the online FTP client and input the following
server/host: ................. Port: 21
username: .................
password: .................
initial directory: /www
SIGN IN
MY EXAMPLE 3:When I got to net2ftp.com I inputed
Server/host: www19.subdomain.com port:21
username : user99989
password : wxjzep
initial directory: /www
I SIGNED IN
HOW TO UPLOAD: After you've logged in to the online FTP client, you will
see an empty directory...click on upload ( at the left side of the page)
FILES TO UPLOAD: The two main files to upload are your tutorial.php and
php.ini...the Two files can be found in the zip file of your IWP. click
on indiawebproxy.zip, click on PHP MODULE...you'll see Testmyserver.php,
tutorial.php and php.ini. drag tutorial.php and php.ini to your desktop
for easier location
$ After clicking on UPLOAD, choose tutorial.php and php.ini
$ You can either choose to rename the tutorial.php or leave it as it is.
RENAME is on the Right side of the page.
MY EXAMPLE 4: http://www.9janetworks.kilu.de/bright.php
NB: FOR THE THREAT OF THOSE WHO SPECIALIZES IN STEALING SERVERS, CHOOSE A
LESS POPULAR SUFFIX eg. japanese.lc,10.je etc OR IF YOU PREFARE USING THE
POPULAR ONES LIKE 1.vg, WAIT FOR A DAY OR 2 DAYS BEFORE UPLOADING YOUR FILES.
HOW TO OPEN A VERIFIED PAYPAL ACCOUNT HERE IN NIGERIA
HOW TO OPEN AND VERIFY PAYPAL ACCOUNT FROM NIGERIA
Step-by-step on how to open your PayPal account from Nigeria
ACCOUNT OPENING REQUIREMENT
(1) An email: A free email like yahoo email is okay.
(2) A permanent IP changer like Your-Freedom software, Ultrasurf , www.hotspotshield.com or proxy sites like: www.ninjacloak.com (Note: The use of proxy sites is not 100% safe)
Be mindful that you MUST NOT access any link that has to do with PayPal directly with Nigeria IP for safety reasons,hence you must always change your IP.
(3) A liberty reserve account: you can open that by going to www.libertyreserve.com it is free and easy to open, and they allow all country. Contact me asap if you do not know how to fund your Liberty Reserve in Nigeria.
PREAMBLE
We are going to use a non European address and non- European Victual Visa Card in the registration and verification of the PayPal account. We shall get any non-European address that PayPal accepts their country and also get a non European virtual card from www.virtual-cc.com
(1) Go to www.virtual-cc.com , click on the card for PayPal verification and then choose non-European card.
(2) Type the amount of unit you want to buy and put your email, this is the email they are going to send the detail of your card, click on calculate price.
Then you click the link to buy the card through Liberty reserve, follow the process of paying through the liberty reserve, the card presently is $7.50, so your liberty reserve account will be charged with $7.50.
(3) In about an hour the card detail will be sent to your email. Note: you have to use this card within 24hrs.
(4) Get a non European address, look for a non-European address of a country that PayPal accepts and use it in your registration with PayPal or you can choose from my list “.
(5) Go to www.google.com type the yellow page of a non-European country that PayPal accepts e.g. china yellow page.
A list of links from google comes up; choose a link that has to do with addresses of businesses.
It will now demand that you should put the category of business address you are looking for, just type computer stores or Beauty salons etc, to give us addresses of these businesses.
Use the detail address of any of the addresses that comes up in your registration with PayPal.
You can use any of the address below; just change the number of the address so that it will not be completely identical will another person.
* Address: 248 Xizang Zhong Road
City: Shanghai
Zip Code: 200001
State : Shanghai
Country : CHINA
Phone: +86 21 6122 7488
* Address: 56 Fuxi Street
City: Taiyuan
Zip Code : 030002
State : Shanxi
Country : CHINA
Phone : +86 351 868 7834
After the detail of the visa credit card has arrived in your email go to www.paypal.com to start your registration.
Never do anything with PayPal with an IP of a country that PayPal does not accept, so you have to use a proxy site, IP changer or anonymizer for this whole deal, you can use www.ninjacloak.com , www.skweezer.com , www.vtunnel.com .
In the search box given, type www.paypal.com and press "enter" on your keyboard.
When you get to PayPal site, click on signup
Choose China for example as your country and choose premium as type of account and continue.
Fill the other detail, you can use your normal name, type the email and password you want to be using for your PayPal account, use the address detail you have gotten above to fill the form, the number in the address is the post code, put the city and the state and then put China as the country of citizenship.
Fill every other part of the form and click sign up at the bottom.
When you finish this session don’t go further, go straight to your email and confirm your email before coming back to put your virtual card.
You still need to do two things:
1. To confirm your email.
2. To verify your account by adding a card.
You will need to hide your IP when you are accessing your email to confirm your PayPal email because by clicking the link PayPal sent to you, you will be re-directed to PayPal website and if you don’t hide your IP when accessing your email, PayPal will discover your real IP and limitation will be placed on your account.
So, first type www.ninjacloak.com, then in the search box type the website of your email like www.yahoomail.com and then enter your email, when you get to your email, click on the email sent to you by PayPal, when you get to the email, click on confirm your email, it will demand for you password, put it and get your email confirmed.
Login into your PayPal account and go ahead and click on the Link and confirm your Debit or Credit Card.
To add the Visa Virtual card and get verified don’t forget to hide your IP.
Fill the form with the detail of the Card sent to your email.
Card Type:- Choose Visa
Card Number:- Add the card number
Card Verification Number: Add the CVV2 Number.
Check the Use this Address as billing address. To use the address you used in filling the form for your billing address.
Click on Add card
Your card will be added to your account but it will be demanding for the 4 digit number. Go to www.virtual-cc.com , at the top of the site you will see “Request PayPal Code”
In the space below it, type your card number and the email you used when buying the card and click on send request, you will be told that a notification when your VCC Number is ready and will be sent to your email.
Be checking your email, that notification will be sent under 30mins, after you’ve seen the notification, go back to the site www.virtual-cc.com and re-type your card number and your email and click on send request and instantly you will see something like XXXX PAYPAL the XXXX represent the 4 digit number you are looking for which would be use for your final stage of verifying your account.
Go to www.paypal.com again and sign in with your email and password (Don’t forget to always go through a proxy e.g. www.ninjacloak.com ).
Look for a link to supply your 4 digit number, click on it and add the 4 digit number gotten above.
Immediately you add it you will see that your account would have been verified.
IN SUMMARY
1. Get email Address.
Get a liberty reserve account & load it with $10. Don’t know how to load your Liberty Reserve account, contact me asap.
3. Get an IP changer or a Proxy site
4. Get a non-European virtual card via www.virtual-cc.com
5. Get a Non European Address
6. Fill a PayPal premium account
7. Confirm your email
8. Add the virtual Card to your account
9. Add the 4 digit number.
If all the pre-exquisite are available, it doesn’t take more than 2hrs.
This trick was curled from EHOW NAIJA and I do not give you guarantee that it will work for you as at the time you are reading this because PayPal might block this virtual credit card once they find out this trick.
More so , just know that I decided to share this article for educational purpose and will never bear any responsibility
Remember, PayPal does not allow Nigerians to own a PayPal account.
call 9janetworks on 07031815582
Step-by-step on how to open your PayPal account from Nigeria
ACCOUNT OPENING REQUIREMENT
(1) An email: A free email like yahoo email is okay.
(2) A permanent IP changer like Your-Freedom software, Ultrasurf , www.hotspotshield.com or proxy sites like: www.ninjacloak.com (Note: The use of proxy sites is not 100% safe)
Be mindful that you MUST NOT access any link that has to do with PayPal directly with Nigeria IP for safety reasons,hence you must always change your IP.
(3) A liberty reserve account: you can open that by going to www.libertyreserve.com it is free and easy to open, and they allow all country. Contact me asap if you do not know how to fund your Liberty Reserve in Nigeria.
PREAMBLE
We are going to use a non European address and non- European Victual Visa Card in the registration and verification of the PayPal account. We shall get any non-European address that PayPal accepts their country and also get a non European virtual card from www.virtual-cc.com
(1) Go to www.virtual-cc.com , click on the card for PayPal verification and then choose non-European card.
(2) Type the amount of unit you want to buy and put your email, this is the email they are going to send the detail of your card, click on calculate price.
Then you click the link to buy the card through Liberty reserve, follow the process of paying through the liberty reserve, the card presently is $7.50, so your liberty reserve account will be charged with $7.50.
(3) In about an hour the card detail will be sent to your email. Note: you have to use this card within 24hrs.
(4) Get a non European address, look for a non-European address of a country that PayPal accepts and use it in your registration with PayPal or you can choose from my list “.
(5) Go to www.google.com type the yellow page of a non-European country that PayPal accepts e.g. china yellow page.
A list of links from google comes up; choose a link that has to do with addresses of businesses.
It will now demand that you should put the category of business address you are looking for, just type computer stores or Beauty salons etc, to give us addresses of these businesses.
Use the detail address of any of the addresses that comes up in your registration with PayPal.
You can use any of the address below; just change the number of the address so that it will not be completely identical will another person.
* Address: 248 Xizang Zhong Road
City: Shanghai
Zip Code: 200001
State : Shanghai
Country : CHINA
Phone: +86 21 6122 7488
* Address: 56 Fuxi Street
City: Taiyuan
Zip Code : 030002
State : Shanxi
Country : CHINA
Phone : +86 351 868 7834
After the detail of the visa credit card has arrived in your email go to www.paypal.com to start your registration.
Never do anything with PayPal with an IP of a country that PayPal does not accept, so you have to use a proxy site, IP changer or anonymizer for this whole deal, you can use www.ninjacloak.com , www.skweezer.com , www.vtunnel.com .
In the search box given, type www.paypal.com and press "enter" on your keyboard.
When you get to PayPal site, click on signup
Choose China for example as your country and choose premium as type of account and continue.
Fill the other detail, you can use your normal name, type the email and password you want to be using for your PayPal account, use the address detail you have gotten above to fill the form, the number in the address is the post code, put the city and the state and then put China as the country of citizenship.
Fill every other part of the form and click sign up at the bottom.
When you finish this session don’t go further, go straight to your email and confirm your email before coming back to put your virtual card.
You still need to do two things:
1. To confirm your email.
2. To verify your account by adding a card.
You will need to hide your IP when you are accessing your email to confirm your PayPal email because by clicking the link PayPal sent to you, you will be re-directed to PayPal website and if you don’t hide your IP when accessing your email, PayPal will discover your real IP and limitation will be placed on your account.
So, first type www.ninjacloak.com, then in the search box type the website of your email like www.yahoomail.com and then enter your email, when you get to your email, click on the email sent to you by PayPal, when you get to the email, click on confirm your email, it will demand for you password, put it and get your email confirmed.
Login into your PayPal account and go ahead and click on the Link and confirm your Debit or Credit Card.
To add the Visa Virtual card and get verified don’t forget to hide your IP.
Fill the form with the detail of the Card sent to your email.
Card Type:- Choose Visa
Card Number:- Add the card number
Card Verification Number: Add the CVV2 Number.
Check the Use this Address as billing address. To use the address you used in filling the form for your billing address.
Click on Add card
Your card will be added to your account but it will be demanding for the 4 digit number. Go to www.virtual-cc.com , at the top of the site you will see “Request PayPal Code”
In the space below it, type your card number and the email you used when buying the card and click on send request, you will be told that a notification when your VCC Number is ready and will be sent to your email.
Be checking your email, that notification will be sent under 30mins, after you’ve seen the notification, go back to the site www.virtual-cc.com and re-type your card number and your email and click on send request and instantly you will see something like XXXX PAYPAL the XXXX represent the 4 digit number you are looking for which would be use for your final stage of verifying your account.
Go to www.paypal.com again and sign in with your email and password (Don’t forget to always go through a proxy e.g. www.ninjacloak.com ).
Look for a link to supply your 4 digit number, click on it and add the 4 digit number gotten above.
Immediately you add it you will see that your account would have been verified.
IN SUMMARY
1. Get email Address.
Get a liberty reserve account & load it with $10. Don’t know how to load your Liberty Reserve account, contact me asap.
3. Get an IP changer or a Proxy site
4. Get a non-European virtual card via www.virtual-cc.com
5. Get a Non European Address
6. Fill a PayPal premium account
7. Confirm your email
8. Add the virtual Card to your account
9. Add the 4 digit number.
If all the pre-exquisite are available, it doesn’t take more than 2hrs.
This trick was curled from EHOW NAIJA and I do not give you guarantee that it will work for you as at the time you are reading this because PayPal might block this virtual credit card once they find out this trick.
More so , just know that I decided to share this article for educational purpose and will never bear any responsibility
Remember, PayPal does not allow Nigerians to own a PayPal account.
call 9janetworks on 07031815582
Subscribe to:
Posts (Atom)